User`s manual

3-4 Industio CP-114 User's Manual
Note ! You may go directly to the step 8 if you need not change any setting.
7. In the “Property” dialog box, select the desired port in the port list and click [Port Setting] to
enter the individual “Port #” setting dialog box to change the port number mappings or FIFO
settings.
l Port Number
You have to set up all the ports of the board with the desired “COM number”, which
should not conflict with other COM number in use. In this “Individual Port Setting”
dialog box, you may have two ways to map the physical ports to COM numbers
depending on the check box “Auto Enumerating COM Number”.