User`s manual

Software Installation
Industio CP-114 User's Manual 3-3
5. Select “MOXA Smartio/Industio Family multiport board” in the “Select OEM
Option” dialog box, and click [OK] to enter the “Moxa Smartio/Industio Configuration
Panel” dialog box to start the installation.
6. In the “Moxa Smartio/Industio Configuration Panel” dialog box, click [Add] to enter
“Property” dialog box to add the Industio CP-114 Series board. Select the “CP-114 Series”
in the “Board Type” field. In the “Property” dialog box, the COM number field of the newly
installed board is set to default COM No. If necessary, you may select to change all the ports
of the board with the desired “COM Number”.