User`s manual

Introduction
Industio CP-114 User's Manual 1-5
Installation Guide
This section gives a brief summary of how to install the Industio CP-114 Series under each supported
operating system. The installation is simple and involves the following stages:
Check the PCI BIOS settings
Install the Industio CP-114 Series board See Chapter 2
and the connection cable
Install the software from the CD-ROM See respective O.S. Section
Configure the driver for the board and ports in Chapter 3
Connect the devices with the cable See Chapter 5 for cable wiring
Restart the system See Chapter 3 “Software
Check the driver initialization status Installation”
If the system restart successfully, you may
develop your applications or See Chapter 4, “Serial
execute the desired applications Programming Tools”