User`s manual

Universal PCI Board Software Installation
3-65
6. After adding Moxa Tech drivers into your OS Design, a new project is automatically added to your
workspace. The project name is mxserce5. The project can be accessed from File View (View
 File
View). The mxserce5 project contains a number of files used to configure the drivers included in your OS
Design.
NOTE
If you would like to use “Terminal Emulator” tool, please modify mxserce5.reg and keyboard like below (This
is only just for “one” “COM” port). You have to notice number of ports, COM, MXU and enter the correct
information.
[HKEY_LOCAL_MACHINE
\ExtModems\HayesCompat1]
“Port”=”COM2:”
“DeviceType”=dword:1
“FriendlyName”=”Hayes Compatible on COM2:”
7. Finally, open Build OS, select Build and Sysgen, and be sure to click Copy Files to Release Directory
After Build and Make Run-Time Image After Build.