User`s manual

Universal PCI Board User’s Manual Driver Installation: Non Windows
8-2
Overview
This chapter explains how to install, configure, update, and remove the board drivers for non
Windows operating systems. Before installing the software, be sure to install the hardware first. For
details on installing the hardware, please refer to Chapter 2.
You can download DOS, Linux, and SCO drivers from the MOXA website. For information on
developing your own serial programming applications, please refer to the next chapter.
DOS
MOXA DOS API-232 is a software package that can help you develop or debug serial
communications programs. This section will show you how to install the package, how to set up the
driver, and how to load or unload the driver. The following models are supported:
CP-102U CP-114UL CP-132UL-I V2 CP-138U-I
CP-102UL CP-118U CP-134U V2 CP-168U V2
CP-104JU V2 CP-118U-I CP-134U-I V2 POS-104UL
CP-104UL V2 CP-132UL V2 CP-138U
Installing the Driver
1. Run the installation program, DOSINST.EXE under \Software\DOS on the Document &
Software CD. Specify the target directory for the API-232 files (e.g., C:\MOXA). Press F2 to
start the installation.