User`s manual

Universal PCI Board User’s Manual Driver Installation: Windows 95/98/ME
7-3
Installing the Driver
The following instructions show how to install the driver for the first time under Windows 95/98/ME.
You will need to plug the board in an available PCI or PCI-X slot first, before installing the driver.
ATTENTION
The following steps will not be necessary if a MOXA UPCI board was already installed on your
computer. Windows will automatically detect and install any additional board(s) at bootup. In this
case, you may proceed directly to configuring the ports.
Windows 95
1. After the board is physically installed and the PC boots up, Windows will automatically detect
the new board and the Found New Hardware Wizard window will open. Click Next to
continue.
2. Select Other Locations…