User`s manual

Universal PCI Board User’s Manual Pin Assignments
10-2
Overview
This chapter provides the pin assignments for each Moxa UPCI multiport serial board, as well as the
pin assignments for the optional accessories. Moxa UPCI boards do not have built-in serial port
connectors. The only exception is the CP-102U, which is built with two DB9 (male) serial
connectors. For all other models, you will need a cable or other accessory with standard serial
connectors in order to connect serial devices to the board. The following chart shows the available
cables and accessories for each model.
Model Board Connector Supported Accessories Serial Connectors
CP-102U 2×DB9 (male) --- ---
CP-102UL
CP-132UL V2
CP-132UL-I V2
DB25 (female) CBL-M25M9x2-50 2×DB9 (male)
CBL-M44M9x4-50 4×DB9 (male)
CP-104UL V2
CP-114UL
CP-134U V2
CP-134U-I V2
DB44 (female)
CBL-M44M25x4-50 4×DB25 (male)
CBL-RJ45M9-150 4×DB9 (male)
CP-104JU V2 RJ45
CBL-RJ45M25-150 4×DB25 (male)
OPT8-M9
CBL-M62M9x8-100 (OPT8D)
8×DB9 (male)
OPT8B
CBL-M62M25x8-100 (OPT8C)
8×DB25 (male)
OPT8A, OPT8S, OPT8F, OPT8Z,
OPT8K, OPT8I
8×DB25 (female)
CP-118U
CP-138U
CP-168U V2
DB62 (female)
OPT8-RJ45* 8×RJ45
CBL-M78M9x8-100 8×DB9 (male) CP-118U-I
CP-138U-I
DB78 (female)
CBL-M78M25x8-100 8×DB25 (male)
POS-104UL DB44 (female) CBL-M44M9x4-50(POS) 4×DB9 (male)
* The OPT8-RJ45 is designed for RS-232 only. It should only be used with the CP-118U in RS-232
mode or with the CP-168U V2.
The serial connectors on each accessory use standard serial port pin assignments. Please refer to the
Serial Connectors section for details.