User`s manual

Universal PCI Board User’s Manual Driver Installation: Non Windows
8-8
4. You should see a message indicating the I/O address, buss number, and device number for the
board. These resources will be automatically assigned by the SCO system. Press Enter to
return to the main configuration screen.
PCI Boards Selecting
1 I/O Addr= AC00, BusNo=2, DevNo=13
Enter: Select ESC: Exit
5. Press Esc to save the configuration and exit. Confirm this action by pressing Y.
Save configuration changes? (Y/N)
6. The driver files will be copied to the SCO system. When prompted, press any key to continue.
Copying driver files and configuring system. Please wait..
Press any key to continue! _
7. When prompted press Y to rebuild the system.
Do you want to rebuild the system? (y/n)_
8. After the system is rebuilt, press any key to return to the shell command. You will now have
access to the serial ports on the UPCI board.
Do you want to rebuild the system? (y/n)
Rebuilding kernel. Please wait..
Rebuilding kernel completed.
Please remember to manually reboot your system later.
Press any key to continue. _