User`s manual

Universal PCI Board User’s Manual Driver Installation: Non Windows
8-7
SCO
The MOXA SCO driver supports the following boards and SCO versions:
Supported Boards Supported SCO Versions
CP-102U
CP-102UL
CP-104JU V2
CP-104UL V2
CP-118U
CP-138U-I
CP-168U V2
SCO OpenServer 5/6
SCO UnixWare 7
1. To install the SCO drivers, first copy the driver file .tar to your host using the following
commands:
#tar xvf <driver tar file>
/tmp/moxa/mxintall
/tmp/moxa/sco.tar
# cd/tmp/mxinstall
# ./mxinstall
2. You should see the following message. Press any key to continue.
Copyright© 2004 Moxa Technologies Co., Ltd.
All Rights Reserved.
MOXA Smartio Family Device Driver Installation (Ver 1.6)
For SCO UNIX System V/386 Release 3.2
Tar files, please wait...O.K.
Press any key to continue
3. A configuration window should appear. Under SCO Unix/SCO Open Server, you can install up
to four Moxa UPCI boards.
MOXA Smartio Family Installation Utility (Ver 1.9)
Smartio Family Basic Configuration
Board No. Board Type I/O Address Interrupt Bus/Dev No.
1 None -------------------------- -------------
2 None -------------------------- -------------
3 None -------------------------- -------------
4 None -------------------------- -------------
PgDn: getty Setting Esc: Exit
Enter: Confirm Input Value Tab: Change Item
Select the board that you are installing and press Enter.
None
C168 ISA Series
C104 ISA Series
C168 PCI Series
C104 PCI Series
CP-104UL Series
CP-168U Series
CP-118U Series
CP-102U/UL Series
CP-104JU Series