User`s manual

Universal PCI Board User’s Manual Driver Installation: Non Windows
8-5
RxD buffer size:
This is the receiving (input) buffer allocated in the system for each port.
F5: Group Edit:
This allows you to configure several ports simultaneously as a group.
5. Press F10 to save the latest configuration and exit the setup program.
Loading the Driver
After setting up the driver, you must load the driver in order to gain access to the serial ports on the
serial board. Run BIN\DP-DRV.EXE at the DOS prompt. The driver will detect your multiport
serial board automatically. You should see messages indicating successful detection of your module,
such as the following:
Smartio/Industio Family DOS driver Version 1.9
Setup driver .
CP-134U series (Bus= x ,Dev=y) : OK!
Device driver setup O.K.
At this point, you can execute applications that support API-232 functions, or start developing
applications using the API-232 library.
Unloading the Driver
To unload or release the driver from memory, enter DP-DRV /Q at the DOS prompt.