User's Manual

3-8 Industio CI-134 Series User’s Manual
3. Click on the [Property] button to open the “MOXA Configuration Panel”
dialog box. Please see steps 6-10 in the previous section, “Installing Driver”, for
more details.
In this configuration panel, you may:
l Click [Property] to enter “Property” dialog box to configure the selected
board with the correct “COM Number”, “INT Vector”, “Interrupt No” and
“Base I/O Port Address”. Please see
steps 6 to 8 in the previous section,
“Installing Driver”, for more details, except that the “Board Type” field is not
supposed to be changed.
l Click [Add] to add one more board that is not yet configured in the system.
Please see
steps 6 to 8 in the previous section, “Installing Driver”, for more
details.
l Click [Remove] to remove the board currently selected from the configured
board list.
l Click [OK] to confirm the configuration changes you made.
l Click [Cancel] to leave the dialog with the configuration unchanged.