Installation guide

5
DIN-Rail Mounting
The aluminum DIN-Rail attachment plate should be fixed to the back panel of
IMC when you take it out of the box. If you need to reattach the DIN-Rail
attachment plate to IMC, make sure the stiff metal spring is situated towards
the top, as shown in the figures below
.
STEP 1:
Insert the top of the DIN-Rail into the
slot just below the stiff metal spring.
STEP 2:
The DIN-Rail attachment unit will
snap into place as shown below.
metal
spring
DIN-Rail
metal
spring
DIN-Rail
To remove Moxa Industrial Media Converter from the DIN-Rail, simply
reverse Steps 1 and 2 above.
Wall Mounting (Optional)
For some applications, you will find it convenient to mount Moxa Industrial
Media Converter on the wall, as illustrated below.
STEP 1:
Remove the aluminum DIN-Rail attachment plate from Moxa Industrial Media
Converter, and then attach the wall mount plates, as shown in the diagrams
below.
⇒
Top
plate
Bottom
plate