User`s manual

IA261/262 Hardware User’s Manual Hardware Introduction
2-5
Real Time Clock
The IA261/262’s real time clock is powered by a lithium battery. We strongly recommend that you
do not replace the lithium battery without help from a qualified MOXA support engineer. If you
need to change the battery, contact the MOXA RMA service team.
WARNING
There is a risk of explosion if the battery is replaced by an incorrect type.
Placement Options
DIN-Rail Mounting
The aluminum DIN-Rail attachment plate is already attached to the product’s casing. To attach the
plate to IA261/262, make sure that the stiff metal spring is facing the top of the IA261/262, as
shown in the following figures.
STEP1: Insert the top of the DIN-Rail into the
slot just below the stiff metal spring.
STEP2: The DIN-Rail attachment unit will
snap into place as shown.
metal
spring
DIN-Rail
metal
spring
DIN-Rail
To remove the IA261/262 from the DIN-Rail, simply reverse Steps 1 and 2.