User`s manual

EDS-508A/505A Series User’s Manual Getting Started
2-6
Perform the following steps to access the console utility by Telnet.
1. Click Start  Run, and then telnet to the EDS’s IP address from the Windows Run window.
(You may also issue the telnet command from the MS-DOS prompt.)
2. Type 1 to choose ansi/vt100, and then press Enter.
3. The Console login screen will appear. Press Enter to open the Account pop-up selector and
then select either admin or user. Use the keyboard’s down arrow to move the cursor to the
Password field, enter the Console Password (this is the same as the Web Browser password;
leave the Password field blank if a console password has not been set), and then press Enter.
4. When the Main Menu of the EDS’s console utility opens, click Terminal  preferences…
from the menu at the top of the window.
5. When the Terminal Preferences window opens, make sure that the VT100 Arrows option is
selected.
NOTE
The Telnet Console looks and operates in precisely the same manner as the RS-232 Console.