Installation guide

— 6 —
Mounting Dimensions (unit = mm)
Rear View
Side View
Front View
DlN-Rail Kit
DlN-Rail Kit
DlN-Rail
105.00
9.00
19.80
35.00
30.00
135.00
13.10 25.40
15.10
53.60
135.00
23.15 46.77 39.37 25.71
13 18 13
27.20
48.30
Wall Mounting Kit
3.5
6
13.9
18.2
6
13.9
10
10
5
7.75
30.50
7.75
66.80
57.05
+
+
+
+
DIN-Rail Mounting
The aluminum DIN-Rail attachment plate should already be fixed to the back
panel of the EDS-P308 when you take it out of the box. If you need to reattach
the DIN-Rail attachment plate, make sure the stiff metal spring is situated
towards the top, as shown in the figures below.
STEP 1:
Insert the top of the DIN-Rail into the
slot just below the stiff metal spring.
STEP 2:
The DIN-Rail attachment unit will
snap into place as shown below.
metal
spring
DIN-Rail
metal
spring
DIN-Rail
To remove the MOXA EtherDevice Switch from the DIN-Rail, simply reverse
Steps 1 and 2 above.