Installation guide

— 10 —
LED Indicators
The front panel of the EDS-P308 contains several LED indicators. The
function of each LED is described in the table below.
LED Color State Description
On
Power is being supplied to power input
PWR1
PWR1 AMBER
Off
Power is not being supplied to power
input PWR1
On
Power is being supplied to power input
PWR2
PWR2 AMBER
Off
Power is not being supplied to power
input PWR2
On
When the corresponding PORT alarm is
enabled, and the port’s link is inactive.
FAULT RED
Off
When the corresponding PORT alarm is
enabled and the port’s link is active, or
when the corresponding PORT alarm is
disabled.
On TP port’s 10 Mbps link is active
Blinking Data is being transmitted at 10 Mbps
10M GREEN
Off TP Port’s 10 Mbps link is inactive
On TP port’s 100 Mbps link is active
Blinking Data is being transmitted at 100 Mbps
100M GREEN
Off 100BaseTX Port’s link is inactive
On
PD is connected and power is being
supplied.
PoE AMBER
Off
PD is not connected or power is not
supplied.