User`s manual

EM-1240-LX User’s Manual Configuring the EM-1240-LX
User Directory Backup—EM-1240-LX to PC
To enable the RAM disk, use the following commands:
/>upramdisk
/>cd ramdisk
Use the backupfs command to back up the file system.
/ramdisk>backupfs /ramdisk/usrdisk-backup
The file system will be backed up. Use ftp commands to transfer the usrdisk-backup to the FTP
server on the PC.
Loading Factory Defaults
The easiest way to “Load Factory Defaults” is with the “Upgrade User directory” operation.
Refer to the previous section, “Upgrading the Root File System & User Directory,” for an
introduction.
You may also press the RESET button for more than 5 seconds to load the factory default
configuration, or input the command “ldfactory” from the Telnet console to restore the factory
defaults.
4-12