User`s guide

Industrial Protocols PROFINET I/O
3-16
c. Click Save and Compile then click download to Module.
4. Configuring device properties
a. Select the switch and double-click the first sub-module slot 0 to set device properties.
b. Select Parameters and change the device parameter settings.
c. Click Save and Compile, then click download to Module
5. Configuring I/O cycle
a. Select the switch and double-click the sub-module X1 to set the I/O cycle.
b. Select IO Cycle and change the I/O cycle settings. Click Save and Compile, then click download to
Module.