User`s guide

Industrial Protocols PROFINET I/O
3-15
c. Click Close to finish
NOTE
The field Device name does not allow any empty spaces in the name. If the device name is entered with a
space, the system will remove words after the space automatically.
3. Set IP address and device for your project
a. Double-click the switch icon to open switch property menu.
b. Set the Device name and IP address corresponding with those you have just assigned in STEP 7.
 Use IP parameters
Manual input of IP address and Subnet mask
 Obtain IP address from a DHCP server
Select MAC address then click Assign IP configuration
After the IP has been assigned by DHCP, click Browse again to check the assigned IP address.