User`s guide

Industrial Protocols EtherNet/IP
2-22
NOTE
Only Moxa pre-configured tags will display the correct values. Refer to the CIP Tags section below for
detailed information.
Sample AOI Project
For easier AOI installation, Moxa has also provided a sample AOI project, in which all the parameters are
configured with default values. The sample project is a (.ACD) file, which is available for download from the
Moxa website or software CD. You may import the sample project in RSLogix 5000, and directly download
this AOI to the PLC with minimal installation steps. But to use the sample project, you still must change or
set up the parameters below.
1. Change the controller type used in the real environment.
2. Change the controller and Moxa switch’s IP address.
3. Setup the Project path.
NOTE
The sample AOI project only supports RSLogix 5000 version 18.
CIP Tags
There are tags for each CIP object. The tags correspond to the object’s attributes.
Tags for Identity Object
Data Type: MOXA_Identity_Object_v0
Name
Data Type
Description
Vendor ID
INT
991, MOXA Vendor ID
Device Type
INT
0x307, “Managed Ethernet Switch”
Product Code
INT
EDS-405A=0x0006, EDS-408A=0x0007,
EDS-505A=0x0008, EDS-508A=0x0009,
EDS-510A=0x000A, EDS-516A=0x000B,
EDS-G509=0x0012
Major Revision
SINT
The structure member, major
Minor Revision
SINT
The structure member, minor
Serial Number
DINT
Switch serial number
Product Name
STRING
Switch model name
Assigned Name
STRING
User assigned switch name
Geographic Location
STRING
User assigned switch location
Tags for TCPIP Object
Data Type: MOXA_TCPIP_Interface_Object_v0
Name
Data Type
Description
Status
DINT
Interface status
Configuration
Capability
DINT
Interface capability flags
Configuration Control
DINT
Interface control flags
Path Size
INT
Size of Path
Object Path 1
INT
Logical segments identifying the physical link object
Object Path 2
INT
Logical segments identifying the physical link object
IP Address
DINT
The device’s IP address
Network Mask
DINT
The device’s network mask
Gateway Address
DINT
Default gateway address
Name Server 1
DINT
Primary name server
Name Server 2
DINT
Secondary name server
Domain Name
STRING
Default domain name
Host Name
STRING
Host name