User`s guide

Industrial Protocols EtherNet/IP
2-12
Bit 11: DI 2(on)
Value 0: No alarm
Value 1: Alarm
Bit 12: Reserved
Value 0: Not support
Value 1: Detected
Bit 13: Power supply 1
Value 0: Off
Value 1:On
Bit 14: Power supply 2
Value 0: Off
Value 1:On
Bit 15~31: Reserved.
3
Get
Switch Port
Number
USINT (8)
Switch max port number
4
Get
Port Exist
ULINT (64)
switch per port exist
Bit mask, the LSB indicates the first port.
Value 0: Not exist
Value 1: Exist
5
Get/Set
Port Enable
ULINT (64)
Switch per port enable
Bit mask, the LSB indicates the first port.
Value 0: Enable
Value 1: Disable
6
Get
Port Link Status
ULINT (64)
Switch per port link status
Bit mask, the LSB indicates the first port.
Value 0: Link down
Value 1: Link up
7
Get/Set
IGMP Snooping
Enable
USINT (8)
IGMP snooping enable:
Value 0: Disable
Value 1: Enable
8
Get/Set
Query Interval
UDINT (32)
Query interval range from 20 to 600 secs
9
Get/Set
IGMP Enhanced
Mode
USINT (8)
IGMP enhanced mode
0: Disable(default)
1: Enable
14
Get/Set
Relay 1
USINT (8)
Override relay warning setting
0: Disable(default)
1: Enable
15
Get/Set
Relay 2
USINT (8)
Override relay warning setting
0: Disable (default)
1: Enable
16
Get/Set
Power 1 Relay
Warning
USINT (8)
Power input 1 failure (on->off)
0: Disable (default)
1: Enable (relay 1)
2: Enable (relay 2)
17
Get/Set
Power 2 Relay
Warning
USINT (8)
Power input 2 failure (on->off)
0: Disable (default)
1: Enable (relay 1)
2: Enable (relay 2)
18
Get/Set
DI 1 (0ff)
Relay Warning
USINT (8)
DI 1 (0ff)
0: Disable (default)
1: Enable (relay 1)
2: Enable (relay 2)
19
Get/Set
DI 1 (on)
Relay Warning
USINT (8)
DI 1 (0n)
0: Disable (default)
1: Enable (relay 1)
2: Enable (relay 2)
20
Get/Set
DI 2 (0ff)
Relay Warning
USINT (8)
DI 2 (0ff)
0: Disable (default)
1: Enable (relay 1)
2: Enable (relay 2)
21
Get/Set
DI 2 (on)
Relay Warning
USINT (8)
DI 2 (0n)
0: Disable (default)
1: Enable (relay 1)
2: Enable (relay 2)
22
Get/Set
Turbo Ring Break
Relay Warning
USINT (8)
Turbo ring break (Ring Master only)
0: Disable (default)
1: Enable (relay 1)
2: Enable (relay 2)
23
Get
CPU Usage
USINT (8)
Percent of usage (0 to100)
24
Get
Device Up Time
UDINT (32)
Number of seconds since the device was powered up
25
Get/Set
Reset MIB Counts
USINT (8)
Reset port MIB counters.
26
Get
Redundant Device
Mode
UDINT (32)
Bit mask of device roles.
Bits 0= RSTP