User`s guide

Industrial Protocols EtherNet/IP
2-11
the string is 64.
5
Get
Port Type
Name
SHORT_STR
ING
String which names the port type. The
maximum number of characters in the string
is 64.
6
Get/Set
Port
Description
SHORT_STR
ING
String which describes the port. The
maximum number of characters in the string
is 64.
7
Get
Node Address
Padded
EPATH
Node number of this device on port. The
range within this data type is restricted to a
Port Segment.
9
Get
Port Key
Packed
EPATH
Electronic key of network/chassis this port is
attached to. This attribute shall be limited to
format 4 of the Logical Electronic Key
segment.
Common Service List
Service
Code
Implementation
Service Name
Description
Class
Instance
0x0E


Get_Attribute_Single
Used to read an object instance attribute
0x10

Set_Attribute_Single
Used to modify an object instance attribute
Moxa Networking Object (Vendor Specific)
The Moxa Networking object includes system information and status.
It can also be used to do the device diagnostic & configuration through explicit messaging.
The class code is 0x404.
Class Attribute List
Attr ID
Access Rule
Name
Data Type
Description
1
Get
Revision
UINT (16)
Revision of this object
Instance Attribute List
Attr
ID
Access
Rule
Name
Data Type
Description
1
Get
Firmware Version
UDINT (32)
Switch firmware version
2
Get
System Fault
Status
UDINT (32)
Switch fault status
Bit 0: Reserved
Value 0: Ok
Value 1: Fail
Bit 1: Reserved
Value 0: Ok
Value 1: Fail
Bit 2: Port utilization alarm
Value 0: No alarm
Value 1: alarm
Bit 3: Port link up
Value 0: No alarm
Value 1: Alarm
Bit 4: Port link down
Value 0: No alarm
Value 1: Alarm
Bit 5: Turbo ring break(Ring Master only)
Value 0: No alarm
Value 1: Alarm
Bit 6: Power Input 1 fail
Value 0: No alarm
Value 1: Alarm
Bit 7: Power Input 2 fail
Value 0: No alarm
Value 1: Alarm
Bit 8:DI 1(off)
Value 0: No alarm
Value 1: Alarm
Bit 9: DI 1(on)
Value 0: No alarm
Value 1: Alarm
Bit 10: DI 2(off)
Value 0: No alarm
Value 1: Alarm