User`s manual

EDS-828 Series User’s Manual Featured Functions
3-74
Bootup This field shows how many times the EDS-828 has been rebooted or cold started.
Date The date is updated based on how the current date is set in the “Basic Setting” page.
Time The time is updated based on how the current time is set in the “Basic Setting” page.
System
Startup
Time
The system startup time related to this event.
Events Events that have occurred.
Syslog Settings
This function provides the event logs for the syslog server. The function supports 3 configurable
syslog servers and syslog server UDP port numbers. When an event occurs, the event will be sent
as a syslog UDP packet to the specified syslog servers.
Syslog Server 1
Setting Description Factory Default
IP Address Enter the IP address of 1
st
Syslog Server used by your
network.
None
Port Destination
(1 to 65535)
Enter the UDP port of 1
st
Syslog Server. 514
Syslog Server 2
Setting Description Factory Default
IP Address Enter the IP address of 2
nd
Syslog Server used by your
network.
None
Port Destination
(1 to 65535)
Enter the UDP port of 2
nd
Syslog Server. 514
Syslog Server 3
Setting Description Factory Default
IP Address Enter the IP address of 3
rd
Syslog Server used by your
network.
None
Port Destination
(1 to 65535)
Enter the UDP port of 3
rd
Syslog Server. 514