User`s manual

EDS-828 Series User’s Manual Featured Functions
3-72
RIP Enable Table
This is a table showing the entries learned from RIP.
NOTE
The RIP settings will not function until you click the Activate button.
Static Route
The Static Route page is used to set up the static routing table for the EDS-828.
Destination Address
You can specify the destination’s IP address.
Subnet Mask
This option is used to specify the subnet mask for this IP address.
Next Hop
This option is used to specify the next router along the path to the destination.
Metric
This option is used to specify the cost we have to pay to access the neighboring network.
There are three action buttons for setting up the Static Routing Table:
Add
To add an entry to the Static Routing Table
Delete
To remove the selected entries from the Static Routing Table
Modify
To modify the contents of a selected entry in the Static Routing Table