User`s manual

EDS-828 Series User’s Manual Featured Functions
3-70
RIP (Routing Information Protocol)
RIP is a distance vector-based routing protocol that can be used to automatically build up a routing
table in the EDS-828.
The EDS-828 can efficiently update and maintain the routing table, and optimize the routing by
identifying the smallest metric and most matched mask prefix.
Interface Setting
The IP Interface Setting page is used to assign the interface.
Interface Name
Used to describe this interface (max. of 30 characters.)
IP Address
This option is used to specify the IP address of this interface.
Subnet Mask
This option is used to specify the subnet mask for this IP address.
VLAN ID
Setting Description Factory Default
ID numbers
Display all available VLAN IDs that you have set in the
Virtual LAN. To establish an interface, you must first
assign an available ID to this interface. If a VLAN ID is
assigned twice, a warning message will appear.
N
one (if no VLAN
ID is available)
Proxy ARP
Setting Description Factory Default
Enable/Disable
This option is used to enable or disable the Proxy ARP.
Disabled