User`s manual

EDS-828 Series User’s Manual Featured Functions
3-47
Configuring IGMP Snooping
IGMP Snooping provides the ability to prune multicast traffic so that it travels only to those end
destinations that require that traffic, thereby reducing the amount of traffic on the Ethernet LAN.
IGMP Snooping Settings
Querier Interval
Setting Description Factory Default
Numerical value
input by user
Set the query interval of the Querier function globally.
Valid settings are from 20 to 600 seconds.
125 seconds
IGMP Snooping Enable
Setting Description Factory Default
Enable/Disable Click the checkbox to enable the IGMP Snooping
function globally.
Disabled
IGMP Snooping
Setting Description Factory Default
Enable/Disable Click the checkbox to enable the IGMP Snooping
function per VLAN.
Enabled if IGMP
Snooping Enabled
Globally
Static Multicast Router Port
Setting Description Factory Default
Select/Deselect Click the checkbox to select which ports will connect to
the multicast routers. It’s active only when IGMP
Snooping is enabled.
Disabled