User`s manual

EDS-828 Series User’s Manual Featured Functions
3-9
DNS IP Address
Setting Description Factory Default
1st DNS Server’s
IP Address
The IP address of the DNS Server used by your
network. After entering the DNS Server’s IP
address, you can input the EDS-828’s url (e.g.,
www.eds.company.com
) in your browser’s
address field, instead of entering the IP address.
None
2nd DNS Server’s
IP Address
The IP address of the DNS Server used by your
network. The EDS-828 will try to locate the
2nd DNS Server if the 1st DNS Server fails to
connect.
None
Time
The EDS-828 has a time calibration function based on information from an NTP server or user
specified Time and Date information. Functions such as Auto warning “Email” can add real-time
information to the message.
NOTE
The EDS-828 does not have a real time clock. The user must update the Current Time and
Current Date to set the initial time for the EDS-828 after each reboot, especially when the
network doesn’t have an Internet connection for NTP server or there is no NTP server on the
LAN.
Current Time
Setting Description Factory Default
User adjustable time. The time parameter allows configuration of the
local time in local 24-hour format.
None (hh:mm:ss)
Current Date
Setting Description Factory Default
User adjustable date. The date parameter allows configuration of the
local date in yyyy-mm-dd format.
None
(yyyy/mm/dd)