User`s manual

EDS-828 Series User’s Manual Featured Functions
3-7
Enable
Setting Description Factory Default
checked Allows data transmission through the port.
unchecked Immediately shuts off port access.
enabled
ATTENTION
If a connected device or sub-network is wreaking havoc on the rest of the network, the Disable
option under Advanced Settings/Port gives the administrator a quick way to shut off access
through this port immediately.
Description
Setting Description Factory Default
Media type Displays the media type for each module’s port N/A
Name
Setting Description Factory Default
Max. 63 Characters Specify an alias for each port, and assist the
administrator in remembering important
information about the port.
E.g., PLC 1
None
Port Transmission Speed
Setting Description Factory Default
Auto Allows the port to use the IEEE 802.3u protocol
to negotiate with connected devices. The port and
connected devices will determine the best speed
for that connection.
100M-Full
100M-Half
10M-Full
10M-Half
Choose one of these fixed speed options if the
opposing Ethernet device has trouble
auto-negotiating for line speed.
Auto-nego
FDX Flow Control
This setting enables or disables the flow control capability of this port when the “port transmission
speed” setting is in “auto” mode. The final result will be determined by the “auto” process
between the EDS-828 and connected devices.
Setting Description Factory Default
Enable Enables flow control for this port when in
auto-nego mode.
Disable Disables flow control for this port when in
auto-nego mode.
Disable