User`s manual

EDS-828 Series User’s Manual Featured Functions
3-4
Switch Location
Setting Description Factory Default
Max. 80
Characters
To specify the location of different EDS-828
units. E.g., production line 1.
Switch Location
Switch Description
Setting Description Factory Default
Max. 30
Characters
Use this space to record a more a detailed
description of the EDS-828 unit.
None
Maintainer Contact Info
Setting Description Factory Default
Max. 30
Characters
To provide information about whom to contact
in order to resolve problems. Use this space to
record contact information of the person
responsible for maintaining this EDS-828.
None
Maintainer Contact Info
Setting Description Factory Default
Disable To disable http and https connections both
http or https To allow either http or https connections
https only
To allow https connection only
http or https
Password
The EDS-828 provides two levels of access privilege: admin privilege gives read/write access of
all EDS-828 configuration parameters, and user privilege provides read access only. You will be
able to view the configuration, but will not be able to make modifications.
ATTENTION
The EDS-828’s default Password is not set (i.e., is blank). If a Password is already set, then you
will be required to type the Password when logging into either the RS-232 Console, Telnet
Console, or Web Browser interface.