User`s manual

EDS-828 Series EDS Configurator GUI
4-2
Starting EDS Configurator
To start EDS Configurator, locate and then run the executable file edscfgui.exe.
NOTE You may download the EDS Configurator software from Moxa’s website at www.moxa.com.
For example, if the file was placed on the Windows desktop, it should appear as follows. Simply double click on
the icon to run the program.
The Moxa EtherDevice Server Configurator window will open, as shown below.
Broadcast Search
Use the Broadcast Search utility to search the LAN for all EDS switches that are connected to the LAN. Note that
since the search is done by MAC address, Broadcast Search will not be able to locate Moxa EtherDevice Servers
connected outside the PC host’s LAN. Start by clicking on the Broadcast Search icon
, or by selecting
Broadcast Search under the List Server menu.
The Broadcast Search window will open, displaying a list of all switches located on the network, as well as the
progress of the search.
Once the search is complete, the Configurator window will display a list of all switches that were located.