User`s manual

EDS-828 Series Featured Functions
3-79
OSPF Area Aggregation Settings
Each of OSPF areas which consist of a set of interconnected subnets and traffic across areas is handled by
routers attached to two or more areas, known as Area Border Routers (ABRs). With OSPF aggregation function,
users can combine groups of routes with common addresses into a single routing table entry. The function is
used to reduce the size of routing tables.
OSPF Aggregation Entry
Configuration details
Setting Description Factory Default
Area ID Select the Area ID that you want to configure. N/A
Network Address Fill in the network address in the area. N/A
Network Mask Fill in the network mask. N/A
OSPF Aggregation Table
Shows the current OSPF aggregation table.
OSPF Neighbor Table
Shows the current OSPF neighbor table.