User`s manual

EDS-828 Series Featured Functions
3-73
Interface Setting
The IP Interface Setting page is used to assign the interface.
Interface Name
Used to describe this interface (max. of 30 characters.)
IP Address
This option is used to specify the IP address of this interface.
Subnet Mask
This option is used to specify the subnet mask for this IP address.
VLAN ID
Setting Description Factory Default
ID numbers Display all available VLAN IDs that you have set in the Virtual
LAN. To establish an interface, you must first assign an
available ID to this interface. If a VLAN ID is assigned twice, a
warning message will appear.
None (if no VLAN ID
is available)
Proxy ARP
Setting Description Factory Default
Enable/Disable This option is used to enable or disable the Proxy ARP. Disabled
There are three action buttons for setting up the IP Interface Table:
Add
To add a entry into the IP Interface Table
Delete
To remove the selected entries from the IP Interface Table
Modify
To modify the content of a selected entry in the IP Interface Table
NOTE The entries in the IP Interface Table will not be added to the EDS-828’s interface table until you click the
Activate button.