User`s manual

EDS-828 Series Featured Functions
3-69
LLDP Web Interface
From the switch’s web interface, users have the option of either enabling or disabling the LLDP, as well as
setting the LLDP transmit interval (as shown in the figure below). In addition, users are able to view each
switch’s neighbor-list, which is reported by its network neighbors. Most importantly, enabling the LLDP function
allows Moxa’s MXview to automatically display the network’s topology as well as system setup details such as
VLAN, and Trunking for the entire network.
LLDP Settings
Enable LLDP
Setting Description Factory Default
Enable or Disable Enable or disable LLDP function. Enable
Message Transmit Interval
Setting Description Factory Default
Numbers from 5 to
32768 secs
Sets the transmit interval of LLDP messages. Unit is in seconds. 30 (seconds)
LLDP Table
Port: The port number that connects to the neighbor device.
Neighbor ID: A unique entity which identifies a neighbor device; this is typically the MAC address.
Neighbor Port: The port number of the neighbor device.
Neighbor Port Description: A textual description of the neighbor device’s interface.
Neighbor System: Hostname of the neighbor device.