User`s manual

EDS-828 Series Featured Functions
3-25
Redundant Ports
Setting Description Factory Default
1st Port Select any port of the EDS-828 to be one of the redundant
ports.
1-1
2nd Port Select any port of the EDS-828 to be one of the redundant
ports.
1-2
Enable Ring Coupling
Setting Description Factory Default
Enable/Disable Select this EDS-828 as Coupler Not checked.
Disable Do not select this EDS-828 as coupler.
Coupling Ports
Setting Description Factory Default
Coupling Port Select any port of the EDS-828 to be the coupling port 1-3
Coupling Control Port
Setting Description Factory Default
Coupling Control Port Select any port of the EDS-828 to be the coupling port 1-4
Configuring “Turbo Ring V2”
NOTE When using the Dual-
Ring architecture, users must configure settings for both Ring 1 and Ring 2. In this case,
the status of both rings will appear under “Current Status.”
Explanation of “Current Status” Items
Now Active
Shows which communication protocol is in use: Turbo Ring, Turbo Ring V2, RSTP, or none.
Ring 1/2—Status
Shows Healthy if the ring is operating normally, and shows Break if the ring’s backup link is active.
Ring 1/2—Master/Slave
Indicates whether or not this EDS-828 is the Master of the Turbo Ring. (This field appears only when selected
to operate in Turbo Ring or Turbo Ring V2 mode.)