User`s manual

EDS-828 Series Featured Functions
3-4
Password
The EDS-828 provides two
levels of access privilege:
admin privilege gives
read/write access of all
EDS-828 configuration
parameters, and user
privilege provides read
access only. You will be able
to view the configuration,
but will not be able to make
modifications.
ATTENTION
The EDS-828’s default Password is not set (i.e., is blank). If a Password is already set, then you will be
required to type the Password when logging into either the RS-
232 Console, Telnet Console, or Web Browser
interface.
Account
Setting Description Factory Default
admin “admin” privilege allows the user to modify all EDS-828
configurations.
admin
user “user” privilege only allows viewing the EDS-828
configurations.
Password
Setting Description Factory Default
Old Password
(Max. 16 Characters)
Type current password when changing the password None
New Password
(Max. 16 Characters)
Type new password when changing the password None
Retype Password (Max.
16 Characters)
If you type a new password in the Password field, you will be
required to retype the password in the Retype new password
field before updating the new password.
None