User`s manual

EDS-828 Series EDS Configurator GUI
4-4
Modify IP Address
You may use the Modify IP Address function to reconfigure the EDS’s network settings. Start by clicking on the
Modify IP address icon
, or by selecting Modify IP address under the Configuration menu.
The Setup Configuration window will open. Checkmark the box to the left of those items that you wish to
modify, and then Disable or Enable DHCP, and enter IP Address, Subnet mask, Gateway, and DNS IP. Click OK
to accept the changes to the configuration.
Export Configuration
The Export Configuration utility is used to save the entire configuration of a specified EDS switch to a text file.
Take the following steps to export a configuration:
1. Highlight the switch (from the Server list in the Configurator window’s left pane), and then click on the
Export toolbar icon
or select Export Configuration from the Configuration menu. Use the Open
window to navigate to the folder in which you want to store the configuration, and then type the name of the
file in the File name input box. Click on Open.
2. Click on OK when the Export configuration to file OK message appears.