User`s manual

EDS-828 Series EDS Configurator GUI
4-3
Search by IP address
This utility is used to search for one EDS switch at a time. Note that the search is conducted by IP address, so
you should be able to locate any EDS switch that is properly connected to your LAN, WAN, or even the Internet.
Start by clicking on the Specify by IP address icon
, or by selecting Specify IP address under the List
Server menu.
The Search Server with IP Address window will open. Enter the IP address of the switch you wish to search
for, and then click OK.
Once the search is complete, the Configurator window will add the switch to the list of switches.
Upgrade Firmware
Keep your EDS switch up to date with the latest firmware from Moxa. Take the following steps to upgrade the
firmware:
1. Download the updated firmware (*.rom) file from the Moxa website (www.moxa.com).
2. Click on the switch (from the Moxa EtherDevice Server Configurator window) whose firmware you wish
to upgrade to highlight it.
3. Click on the Upgrade Firmware toolbar icon
, or select Upgrade under the Firmware menu. If the
switch is Locked, you will be prompted to input the switch’s User Name and Password.
4. Use the Open window to navigate to the folder that contains the firmware upgrade file, and then click on
the correct “*.rom” file (eds.rom in the example shown below) to select the file. Click on Open to activate
the upgrade process.