User`s manual

EDS-600 Series User’s Manual Featured Functions
3-42
Head Role
Setting Description Factory Default
Head Port
Select any port of the EDS to be the
head port.
EDS-608: port 2-3
EDS-611: port G2
EDS-616: port 4-3
EDS-619: port G2
Member Port
Select any port of the EDS to be the
member port.
EDS-608: port 2-4
EDS-611: port G3
EDS-616: port 4-4
EDS-619: port G3
Member Role
Setting Description Factory Default
1
st
Member port
Select any port of the EDS to be the
1
st
member port
EDS-608: port 2-3
EDS-611: port G2
EDS-616: port 4-3
EDS-619: port G2
2
nd
Member port
Select any port of the EDS to be the
2
nd
member port
EDS-608: port 2-4
EDS-611: port G3
EDS-616: port 4-4
EDS-619: port G3
Tail Role
Setting Description Factory Default
Tail Port
Select any port of the EDS to be
the tail port.
EDS-608: port 2-3
EDS-611: port G2
EDS-616: port 4-3
EDS-619: port G2
Member Port
Select any port of the EDS to be
the member port.
EDS-608: port 2-4
EDS-611: port G3
EDS-616: port 4-4
EDS-619: port G3
NOTE
There are certain restrictions on which ports can be used as chain ports.
1. You may use any two of the non-Gigabit ports as the chain ports; however, the two chain
ports for a particular switch must be on the same module.
2. If you need to use Gigabit ports as chain ports, you must use the second and third Gigabit
ports (G2 and G3) as the chain ports (but do NOT use G1).