User`s manual

EDS-600 Series User’s Manual Featured Functions
3-16
System File Update—By Remote TFTP
The EDS-600 supports saving your configuration file to a remote TFTP server or local host to
allow other EDS-600 switches to use the same configuration at a later time, or saving the Log file
for future reference. Loading pre-saved firmware or a configuration file from the TFTP server or
local host is also supported for easy upgrading or configuration of the EDS-600.
TFTP Server IP/Name
Setting Description Factory Default
IP Address of TFTP
Server
The IP or name of the remote TFTP server. Must be
set up before downloading or uploading files.
None
Configuration Files Path and Name
Setting Description Factory Default
Max. 40 Characters The path and file name of the EDS-600’s
configuration file in the TFTP server.
None
Firmware Files Path and Name
Setting Description Factory Default
Max. 40 Characters The path and file name of the EDS-600’s firmware
file.
None
Log Files Path and Name
Setting Description Factory Default
Max. 40 Characters The path and file name of the EDS-600’s log file None
After setting up the desired path and file name, click Activate to save the setting, and then click
Download to download the prepared file from the remote TFTP server, or click Upload to upload
the desired file to the remote TFTP server.