User`s manual

EDS-600 Series User’s Manual Featured Functions
3-4
Account
Setting Description Factory Default
admin “admin” privilege allows the user to modify all
EDS-600 configurations.
user “user” privilege only allows viewing EDS-600
configurations.
admin
Password
Setting Description Factory Default
Old Password
(Max. 16 Characters)
Type current password when changing the
password
None
New Password
(Max. 16 Characters)
Type new password when changing the password None
Retype Password
(Max. 16 Characters)
If you type a new password in the Password field,
you will be required to retype the password in the
Retype new password field before updating the
new password.
None
Accessible IP
The EDS-600 uses an IP address-based filtering method to control access to the EDS-600 units.
Accessible IP Settings allows you to add or remove “Legal” remote host IP addresses to prevent
unauthorized access. Access to the EDS-600 is controlled by IP address. If a host’s IP address is in
the accessible IP table, then the host will be allowed access to the EDS-600. You can allow one of
the following cases by setting this parameter:
y Only one host with the specified IP address can access the EDS-600
E.g., enter “192.168.1.1/255.255.255.255” to allow access to just the IP address 192.168.1.1.
y Any host on a specific subnetwork can access the EDS-600
E.g., enter “192.168.1.0/255.255.255.0” to allow access to all IPs on the subnet defined by
this IP address/subnet mask combination.
y Any host can access the EDS-600
Disable this function by deselecting the Enable the accessible IP list option.