User`s manual

EDS-516A Series User’s Manual Featured Functions
3-17
User Auth. Type (for SNMP V1, V2c, V3 and V3 only)
Setting Description Factory Default
No-Auth
Use admin account or user account to
access objects. No authentication.
No
MD5-Auth
Provides authentication based on the
HMAC-MD5 algorithms. 8-character
passwords are the minimum requirement
for authentication.
No
SHA-Auth
Provides authentication based on the
HMAC-SHA algorithms. 8-character
passwords are the minimum requirement
for authentication.
No
User Data Encryption Key (for SNMP V1, V2c, V3 and V3 only)
Setting Description Factory Default
Enable
8-character data encryption key is the
minimum requirement for data encryption
(maximum of 30 characters)
No
Disable No data encryption No
Trap Settings
1
st
Trap Server IP/Name
Setting Description Factory Default
IP or Name
Enter the IP address or name of the 1
st
Trap Server used by your network.
None
1
st
Trap Community
Setting Description Factory Default
character string
Use a community string match for
authentication (maximum of 30
characters).
public
2nd Trap Server IP/Name
Setting Description Factory Default
IP or Name
Enter the IP address or name of the 2
nd
Trap Server used by your network.
None
2nd Trap Community
Setting Description Factory Default
character string
Use a community string match for
authentication (maximum of 30
characters).
public
Private MIB information
Switch Object ID
Setting Description Factory Default
8691.7.5 EDS-516A’s enterprise value Fixed
NOTE: The Switch Object ID cannot be changed.