User`s manual

EDS-516A Series User’s Manual Featured Functions
3-3
Password
The EDS-516A provides two levels of access privileges: admin privilege gives read/write access
to all EDS-516A configuration parameters, and user privilege provides read access only. You will
be able to view the configuration, but will not be able to make modifications.
ATTENTION
The EDS-516A’s default Password is not set (i.e., is blank). If a Password is already set, then
you will be required to type the Password when logging into the RS-232 Console, Telnet
Console, or Web Browser interface.
Account
Setting Description Factory Default
admin “admin” privilege allows the user to modify all
EDS-516A configuration settings.
user “user” privilege only allows viewing the
EDS-516A configurations.
admin
Password
Setting Description Factory Default
Old Password
(Max. 16 Characters)
Type current password when changing the
password
None
New Password
(Max. 16 Characters)
Type new password when changing the password None
Retype Password
(Max. 16 Characters)
If you type a new password in the Password field,
you will be required to retype the password in the
Retype new password field before updating the
new password.
None