User`s manual

EDS-405A/408A Series User’s Manual Featured Functions
3-60
Test Email function to see if your e-mail addresses and mail server address have been
properly configured.
Email Warning Events Settings
NOTE: The user interface for the EDS-408A shows 8 ports.
Event Types
Event Types can be divided into two basic groups: System Events and Port Events. System
Events are related to the overall function of the switch, whereas Port Events are related to the
activity of a specific port.
System Event Warning e-mail is sent when…
Switch Cold Start Power is cut off and then reconnected.
Switch Warm Start The EDS is rebooted, such as when network
parameters are changed (IP address, netmask, etc.).
Power Transition (OnÆOff) The EDS is powered down.
Power Transition (OffÆOn) The EDS is powered up.
Configuration Change Activated Any configuration item is changed.
Comm. Redundancy Topology
Changed
If any Spanning Tree Protocol switches have
changed their position (applies only to the root of the
tree). If the Master of Turbo Ring has changed or
backup path is activated.
Authentication Failure An incorrect password is entered.
Port Event Warning e-mail is sent when…
Link-on The port is connected to another device.
Link-off
The port is disconnected (e.g., the cable is pulled
out, or the opposing device shuts down).
Traffic-Overload The port’s traffic surpasses the Traffic-Threshold for