User`s manual

EDS-405A/408A Series User’s Manual Featured Functions
3-15
Auto load system configurations when system boots up
Setting Description Factory Default
Enable
Enables Auto load system configurations when
system boots up
Disable
Disables Auto load system configurations when
system boots up
Enable
Save the current configurations to ABC
To export the current configuration file of the EDS, click on Save to save it to the ABC.
Load the ABC’s configurations to the Switch
To import the configuration file of the EDS, click on Load to load it to the Switch.
Restart
This function is used to restart the Moxa EtherDevice Switch.
Factory Default
The Factory Default function is included to give users a quick way of restoring the EDS’s
configuration settings to their factory default values. This function can be accessed from either the
telnet/RS-232 Console, or Web Browser interface.
NOTE
After activating the Factory Default function, you must use the default network settings to
re-establish a web-browser or Telnet connection with your Moxa EtherDevice Switch.
Configuring SNMP
EDS switches support SNMP protocol. The available versions are SNMP V1, SNMP V2c, and
SNMP V3. SNMP V1 and SNMP V2c use a community string match for authentication, which
means SNMP servers access all objects with read-only or read/write permissions using the
community string public/private (default value). SNMP V3, which requires you to select an
authentication level of MD5 or SHA, is the most secure protocol. You can also enable data
encryption to enhance data security.
SNMP security modes and security levels supported by the EDS are shown in the following table.