User`s manual

Moxa E Series Managed Ethernet Switch Featured Functions
3-63
Industrial Protocol
The Moxa switch supports 3 industrial protocols, EtherNet/IP, Modbus TCP and PROFITNET I/O. Those 3
protocols can be enable/disabled by checkbox selection.
NOTE
1.
IGMP Snooping and IGMP Query functions will be enabled automatically to be properly integrated in
Rockwell systems for multicast Implicit (I/O) Messaging for efficient EtherNet/IP communication.
2.
EtherNet/IP can’t be enabled while IGMP snooping is disabled due to VLAN setting.
Diagnostics
The Moxa switch provides three important tools for administrators to diagnose network systems.
LLDP
Overview
LLDP is an OSI Layer 2 protocol defined by IEEE 802.11AB. LLDP standardizes the self-identification
advertisement method, and allows each networking device, such as a Moxa managed switch, to periodically
send its system and configuration information to its neighbors. Because of this, all LLDP devices are kept
informed of each other’s status and configuration, and with SNMP, this information can be transferred to
Moxa’s MXview for auto-topology and network visualization.