User`s manual

Moxa E Series Managed Ethernet Switch Getting Started
2-2
USB Console Configuration (115200, None, 8, 1,
VT100)
NOTE
•
You cannot connect to the USB console and command line interface at the same time.
•
You can connect to the web console and another console (serial or Telnet) at the same time. However, we
strongly recommend that you do NOT do so.
Following this advice will allow you to maintain better control
over the Moxa switch’s configuration.
NOTE
We recommend
using PComm Terminal Emulator when opening the USB console. This software can be
downloaded free of charge from the Moxa website.
Before running PComm Terminal Emulator, please install the USB console driver to your PC then connect the
Moxa switch’s USB console port to your PC’s USB port with USB cable.
After installing PComm Terminal Emulator, open the Moxa switch’s USB console as follows:
1. From the Windows desktop, click Start  Programs  PComm Lite 1.3  Terminal Emulator.
2. Select Open under the Port Manager menu to open a new connection.