User`s manual

Moxa E Series Managed Ethernet Switch Featured Functions
3-37
NOTE
If a router or layer 3 switch is connected to the network, it will act as the Querier, and consequently this
Querier option will be disabled on all Moxa layer 2 switches.
If all switches on the network are Moxa layer 2
switches, then only one layer 2 switch will act as Querier.
IGMP Group Status
The Moxa switch displays the current active IGMP groups that were detected. View IGMP group setting per
VLAN ID on this page.
The information shown in the table includes:
• Dynamic Router Port: This indicates that a multicast router connects to/sends packets from these port(s).
• Static Router Port: Displays the static multicast querier port(s)
• Querier Connected Port: Displays the port which is connected to the querier
• Role: Indicates if the switch is a querier. Displays Querier or Non-Querier
• Group: Displays the multicast group addresses
• Port: Displays the port which receive the multicast stream/the port the multicast stream is forwarded to
• Version: Displays the IGMP Snooping version
• Filter Mode: Indicates the multicast source address is included or excluded. Displays Include or Exclude
when IGMP v3 is enabled
• Sources: Displays the multicast source address when IGMP v3 is enabled
Stream Table
This page displays the multicast stream forwarding status. It allows you to view the status per VLAN ID.