User`s manual

Moxa E Series Managed Ethernet Switch Featured Functions
3-27
Port Type
Setting Description Factory Default
Access Port type is used to connect single devices without tags. Access
Trunk Select Trunk port type to connect another 802.1Q VLAN aware
switch
Hybrid Select Hybrid port to connect another Access 802.1Q VLAN
aware switch or another LAN that combines tagged and/or
untagged devices and/or other switches/hubs.
ATTENTION
For communication redundancy in the VLAN environment, set
Redundant Port Coupling Port and
Coupling Control Port
as Trunk Port since these ports act as the backbone to transmit all packets of
different VLANs to different Moxa switch units.
Port PVID
Setting Description Factory Default
VID ranges from 1 to
4094
Sets the default VLAN ID for untagged devices that connect to
the port.
1
Tagged VLAN
Setting Description Factory Default
VID ranges from 1 to
4094
This field will be active only when selecting the Trunk or Hybrid
port type. Set the other VLAN ID for tagged devices that
connect to the port. Use commas to separate different VIDs.
None
Untagged VLAN
Setting Description Factory Default
VID range from 1 to
4094
This field will be active only when selecting the Hybrid
port type. Set the other VLAN ID for tagged devices that
connect to the port and tags that need to be removed in egress
packets. Use commas to separate different VIDs.
None
Forbidden VLAN
Setting Description Factory Default
VID ranges from 1 to
4094
This
field will be active only when selecting the Trunk or Hybrid
port type. Set the other VLAN IDs that will not be supported by
this port. Use commas to separate different VIDs.
None
NOTE
Quick Setting Panel
provides a quick way to setup multiple VLAN ports with the same setting.