User`s manual

Moxa E Series Managed Ethernet Switch Featured Functions
3-26
Configuration Virtual LAN
VLAN Settings
To configure 802.1Q VLAN and port-based VLANs on the Moxa switch, use the VLAN Settings page to
configure the ports.
VLAN Mode
Setting Description Factory Default
802.1Q VLAN Set VLAN mode to 802.1Q VLAN 802.1Q VLAN
Port-based VLAN Set VLAN mode to Port-based VLAN
802.1Q VLAN Settings
The EDS E series support quick setting panel for VLAN setting. Administrator can configure VLAN by ports group and add
the setting to the VLAN ID Configuration Table. Once the configuration is finalized, then activate the final setting to
system by pressing Apply button.
Port Settings
Setting Description Factory Default
Port name from 1 to 7 or G1 to G16
Group ports need to separate by “,” or “:”.
(e.g. “G1, G3” means apply the setting to port G1 and
G3; “G1:G3” means apply the setting from G1 to G3)
Assign Port name
for configuration
none
Enable GVRP
Setting Description Factory Default
Enable/Disable Enables or disables the GVRP function. Enable
Management VLAN ID
Setting Description Factory Default
VLAN ID from 1 to 4094 Assigns the VLAN ID of this Moxa switch. 1