User`s manual

Moxa E Series Managed Ethernet Switch Featured Functions
3-22
activated by DIP switch
configuration
Setting Description Factory Default
Set DIP switch as Turbo Ring Enable Turbo Ring protocol when
DIP switch change to ON
Set DIP switch as Turbo Ring v2
Set DIP switch as Turbo Ring v2 Enable Turbo Ring v2 protocol
when DIP switch change to ON
NOTE
If the 4
th
DIP switch (Turbo Ring) is configured to ‘ON’, users will not be able to disable the Turbo Ring DIP
switch from web interface, console, and Telnet.
Restart
This function provides users with a quick way to restart the system.
Factory Default
This function provides users with a quick way of restoring the Moxa switch’s configuration to factory defaults.
The function is available in the USB serial, Telnet, web-based consoles and hardware reset button.
NOTE
After restoring the factory default configuratio
n, you will need to use the default network settings to
re
-establish the web or Telnet console connection with the Moxa switch.
VLAN
Setting up Virtual LANs (VLANs) on your Moxa switch increases the efficiency of your network by dividing the
LAN into logical segments, as opposed to physical segments. In general, VLANs are easier to manage.
The Virtual LAN (VLAN) Concept
What is a VLAN?
A VLAN is a group of devices that can be located anywhere on a network, but which communicate as if they are
on the same physical segment. With VLANs, you can segment your network without being restricted by